Heat Pump+commercial food dehydrator machine for food dehydrator large capacity mushroom drying

Heat Pump+commercial food dehydrator machine for food dehydrator large capacity mushroom drying-Energy saving Drying technology

 

ESEEGO commercial food dehydrator machine is a green technology industrial dehydrator. It use the heat pump technology for food drying, compared the traditional electric dehydrator, it can 70% energysaving. It can help you save a lot of cost. The large commercial food dehydrators on the market. The intelligent control system will drying the materials automatic after you finish the setting on control panel. The ability of the heat pump to be able to modulate its output to suit the demands of the food drying can deliver significant cost savings.

 

We are a professional OEM food dehydrator manufacturer and supplier. Welcome good partner come to us from all around the world.

Our commercial food dehydrator machine have been selling to around the world, like North Korea, South Korea, Mongolia and Japan, Vietnam, Laos, Cambodia, Myanmar, Thailand, Malaysia, Singapore, Indonesia, Philippines, Brunei, Timor Leste, Sri Lanka, Maldives, Pakistan, India, Bangladesh, Nepal, Bhutan, Iran, Turkey, Cyprus, Syria, Lebanon, Palestine, Israel, Jordan, Iraq, Kuwait, Saudi Arabia, Yemen Oman, United Arab Emirates, Qatar, Bahrain, Georgia, Armenia and Azerbaijan, Turkmenistan, Uzbekistan, Kyrgyzstan, Tajikistan, Kazakhstan and Afghanistan.

How do mushroom dry?

Introduction to the application process of High efficient commercial mushroom dehydrator:

Commercial mushroom dehydrator is driven by a small amount of electric energy and heated by compressed air. The drying process is operated intelligently. The dried mushrooms are full and deeply loved by market consumers, and can meet the export standard. The equipment has the advantages of energy saving, high efficiency, stable performance, uniform temperature rise and good moisture removal effect.

The collected Lentinus edodes should be sorted immediately. Firstly, cut off the mushroom feet with scissors and leave a 1cm long mushroom handle. Then, according to the variety and quality, they should be classified and cleaned according to flower mushrooms, thick mushrooms and thin mushrooms.

After cleaning, put the mushrooms on the net plate and send them to the drying room for drying.

When drying, it must be low temperature first, and then gradually increase the temperature.

After the mushroom is sent to the drying room, it should be baked continuously until it is dry. The heating cannot be interrupted, and the temperature cannot be raised or lowered from time to time, otherwise the color of Lentinus edodes will turn black and the quality will decline.

In addition to strictly controlling the heating temperature, timely dehumidification is also an important link in the drying process of Lentinus edodes.

 

mushroom drying principle

The commercial mushroom dehydrator is adopted heat pump technology, mainly consists of four parts: a finned evaporator (external unit), a compressor, a finned condenser (internal unit), and an expansion valve. Continue to evaporate refrigerant (absorb heat from outdoor environment), compress and condense (release heat from indoor drying room), throttle and re evaporate the thermal cycle process. The compressor completes the gas rising pressure heating process (temperature reaches 100), enters the internal machine to release high-temperature heat, heats and dries indoor air, and self cools to convert into oil. If it runs on an external machine, the liquid will quickly absorb heat, evaporate, and be converted back into gas, and the temperature may drop to -20~-30. High temperature heat pump dryers, like ordinary air conditioning and heat pump devices, absorb the energy of low-temperature environmental media from the evaporator. It can be seen that the heating efficiency of heat pump dryers is much higher than that of other heating equipment. Using heat pump dryers as drying devices can not only save energy, but also reduce the emissions of pollutants such as CO2, achieving the effect of energy conservation and emission reduction.

 

Features

1. Heat pump technology- advanced drying technology

2. High efficiency

3. Saftey- d6ryer have different kinds of internal protections

4. Smart control system-you can see different parameter on the panel,after setting, the drying system will run automatic to get final materials.

5. environmental protection-No discharge of harmful substances such as waste water, carbon dioxide, etc

6. Enery saving, It is 70% energy saving compared electric drying or gas drying

7. Stable-it would not affected by the weather if chooose closed loop system.

 

Applications

ESEEGO commercial heat pump food drying machine is suitable fordrying bedding in hotels, seafood, vegetable dehydration, AD black fungus,melon seeds, peanuts, fruits and vegetables, meat products, casings, tobaccoleaves, leather, mushrooms, wolfberry, dried fruits, mosquito coils, tributeIncense, cloth, clothing, grains, vermicelli, yuba, fertilizers, medicines,Chinese medicinal materials, paper products, wood, seeds, sludge, gypsum,hardware products, metallurgical products, mining by-products, chemicalproducts, flue gas desulfurization gypsum, clay , forage grass, flue-curedtobacco, pulverized coal, coal slime, lignite, etc. In terms of industrial hotwater, it can also meet the constant temperature of electroplating liquid inelectroplating plants, the heating and insulation of high-temperature hot waterin slaughterhouses, the supply of high-temperature hot water in star-ratedhotels and the needs of high-temperature hot water in industrial enterprises. 

 

Technology prospect

The material drying process is a hugeenergy-consuming process. According to statistics, in most developed countries,the energy consumed for drying accounts for 7%-15% of the national total energyconsumption, while the thermal efficiency is only 25%-50%. , and most dryingprocesses, especially for heat-sensitive materials (such as food and biologicalmaterials), will have an impact on their color, nutrition, flavor and texture.Heat pump drying technology has the advantages of less energy consumption, lessenvironmental pollution, high drying quality, and wide application range. Itsexcellent energy-saving effect has been proved by various experimentalresearches at home and abroad.

 

Do you want to find wholesaler supplier or manufactuer?

We are as a professional industrial food dehydrators manufacturer and supplier, we can offer the cheapest dehydrator cost to the customers, not have the middleman, each year we done many different kinds of drying solution, we get a lot of the food drying installation and drying experience, you will get professional service and support from us.

 

Warranty

We offer One year warranty for whole units

Offer 1% Free Spare part with container order.

Lifetime after-sales support

 

Please contact us, you will find the best mushroom dehydrator from us.

 

 

Hot Tags: Heat Pump+commercial food dehydrator machine for food dehydrator large capacity mushroom drying, China, suppliers, manufacturers, factory, customized, price, for sale, made in China, dehydrated fruit, China fish drying machine factory, cookie dehydrator, China food drying machine factory, vegetable dehydrating plant, Customized large dehydrator machine