Precautions for Dehumidifier used in storage room

Due to factors such as weather and geographical location, high humidity can often occur in some household storage rooms and company warehouses. With the improvement of people's living standards, people have become more and more inclined to purchase Dehumidifier to keep the air in the storage room relative humidity. Compared with traditional dehumidification techniques, modern Dehumidifier have high convenience. Then the following editor will explain the purchasing skills of Dehumidifier in detail.
Storage room Dehumidifier - Operating principle of storage room Dehumidifier
The working principle of a storage room is that a fan draws moist air into the machine, and through a heat exchanger, water molecules in the air condense into water droplets. The treated dry air is discharged from the machine, and this cycle keeps the indoor humidity at an appropriate relative humidity.
Dehumidifier in Storage Room -- Purchasing Skills of Dehumidifier in Storage Room
1. Check the appearance to see whether each part of the warehouse Dehumidifier is of fine workmanship, and whether the surface of the plastic parts is smooth and even in color. The surface of the electroplated parts should be smooth and free from defects such as peeling, exposure, and scratches.
2. Inspection of the air guide plate. The air guide plate should be able to move up and down or left and right, not too tight, nor too loose. It should be positioned in any position and should not automatically shift.
3. Check the filter screen. The filter screen is a frequently disassembled component, and it should be checked for convenience and damage.
4. Inspection of all function keys and knobs The knobs on the Dehumidifier panel should rotate flexibly, fall down, and not loosen or slide; The function selection buttons of the computer controlled Dehumidifier are light and flexible, and can never be stuck.
5. Power on inspection For the integrated warehouse Dehumidifier, power on inspection can be used for heating: in winter or when the temperature is low, purchase the warehouse Dehumidifier, trial produce the hot air function, power on for a few minutes, and hot air should come out.
6. Noise and vibration Inspection During dehumidification, the warehouse Dehumidifier shall be free of abnormal impact noise and vibration.
7. Electrical performance inspection: Check whether the power cord and plug meet the specifications, and pull the power cord firmly without loosening or pulling it out. If possible, the cold insulation resistance of the warehouse Dehumidifier can be measured.
8. The inspection of attachments and technical documents should check whether the instructions, certificate of conformity, warranty card, packing list and other technical documents are complete, and check whether the attachments are complete according to the packing list.